Have root access, but now you want to load some custom ROMs for even MORE features?! We’ll we’re here to help

Thanks Paul at Modaco!
Thanks Amon Ra!

I. Before You Begin

1. You MUST have root access! Do our How To Root the Nexus One procedure and THEN come back to this procedure and continue.

II. Flash a Custom Recovery Image

1. Download the Nexus One Amon Ra Recovery Image below:

Nexus One Recovery Image (Link under Download in the first Post)

2. Save the recovery image file inside the superboot folder you used to root the phone.

3. Turn the phone off and then plug it in via USB cable.

4. Turn it on by holding down Power and the Trackball to get into fastboot mode.

5. Open a command prompt and type the following with hitting enter at the end of each line:

cd\
cd c:\superboot
fastboot-windows devices

*this is to check that the computer can see the phone (a serial should pop up if it can)

6. Then type:

fastboot-windows flash recovery recovery-RA-nexus-v1.5.3.img

7. This should flash the recovery image onto the phone.

III. Flash the Custom ROM

1. Download the ROM you want from our Android ROMs section. (Make sure to choose a ROM for the Nexus One and not another phone!)

2. Turn off the phone.

3. Turn it back on by holding down Home and Power until the recovery screen comes up.

4. Select Nandroid Backup (to save a backup just in case)

5. Then select Mass Storage On and plug your phone into the computer.

6. Copy the ROM .zip file to your phone’s SD card then unplug the phone.

7. Click USB MS Toggle.

8. Click Apply .zip from SD Card and then select the ROM you just copied.

9. Wait for it to finish loading and click Reboot. All done!